POLJOT watch is the first-class-quality product with its DI 29 mm mechanism with 17 rubies comprising of the additive timer, signalling device, anti-shock equipment, being absolutely waterproof. The watch contains two independent mechanisms, one for hours and the other for signalling with the individual spring actuated mechanisms with two controlling crowns: the upper alarm button (signalling mechanism) and botton crown (hour mechanism).

a/ Normal position-Winding up the watch
b/ First click-Time setting
c/ Winding UP the alarm
d/ Alarmsetting

- Average daily watch operation under the temperature of +/-20'C (+/-5°C) from -2 to +5 sec per day
- Period of the watch energy independence with the total windig up of the mechanism 42 hours
- Average life period minimally 10 years
- Watch-case surface 5 mcar.gold
- Balance wheel oscillation period 0,4 sec.
- Sound signal interval minimally 10 sec.

How to Use Your Watch

1. The watch is a complex apparatus requiring an adequate treatment. Observing any our advice for the use will ensure the long-term life of operation, performance and accuracy of your watch.
2. The watch is winding up through turning the crown. Winding up should be quit immediately when the crown is resistant against its turning.
3. Winding up the signalling spring is done through turning the alarm button. After completing this action you can listen a short beep.
4. For setting the hour and minute hands it is necessary the crown to be pulled out softly from the watch-case since its fixed position and through turning the crown to move the hands in the clock-wise direction. When the hands reach the current time, push back the crown to its starting position. Never turn the crown in the counter-clock-wise direction due to possible damage of the signalling equipment and failure of your watch.
5. Setting the required time for the signalling mechanism is done with the alarm button. Softly pull out the alarm button to the fixed position and turn it in the counter-clock-wise direction and the alarm hand is turning against the hour and minute hands. After setting the alarm hand to the required position, turn the alarm button back by 12 up 1 revolution (while the alarm hand is not moving) and then push backthe alarm button to its starting position. For switching off the signalling it is necessary to pull out the alarm button from the watch-case, to set the alarm hand to any other position than before and next to push the alarm button to the watch-case.
6. Your watch is repairable. It will serve you for the long time reliably keeping its accuracy if you follow these rules:
- Regularly winding up your watch once per 24 hours (recommended in the morning) until the full winding up of the spring.
- Minimally once per two years after elapsing the guarantee period allow your watch to be cleaned, lubricated and set up with the qualified repairer.
- Protect your watch against the fall, extreme shocks, strong magnetic field and effects of chemicals
- Every 2-3 years to check the hermetic sealing protecting water and dust leakage. This sealing is produced of wearing material. -After any contact with the sea water, rinseyourwatch with the potable water and wipe it carefully.

Please Follow Our Recommendations:
- Never open the cover of the watch-case. Avoiding any opening you are protecting your watch against any unqualified touch and leaking dust and impurities info the mechanism.
- Never expose your watch to the high temperature differences that could lead to sweating watch-glass.