Poljot
2824-2
- GOST 10733
- With automatic winding, rotor is based on
spherical bearing, function of second stopwatch.
- Functions include: hours, minutes, seconds;
date box with a button of quick correction
- Diameter - 25,6 mm Movement - 4,6 mm 17 Ruby
jewels
- Mean daily rate at temperature 20 + 5oC from
-20 to + 40 s/day
- Frequency - 28800 half-oscillations/h
- Regulation system ETACHRON with adjustment
device
- Autonomy at least 38 hours after full winding
- Run time after 10-hours of wrist-wearing
- at least 24h
Resistance to exposure of magnetic fields with
intensity less than 4800 A/M
TECHNICAL SPECIFICATIONS
- The Watch with 2824-2 movement produced
by a Swiss company ETA has 25 Ruby jewels, shock-resistance device of a balance
staff, with an automatic device of a balance staff, with an automatic device
of mainspring winding, with inertial sector of automatic winding movement
on spherical bearing, with date-of-the month calendar, with quick correction
of calendar display indications without current time errors, with second hand
stop, which allows to perform watch startup according the time signals.
- Minimum 38 hours of work after full winding.
- Calendar is of an instant type - the calendar
display indications change automatically once a day within the range from
23 ( 11 p.m.) to 1 a.m.
USER'S MANUAL
- Watch winding and current time setting
The watch, which has stopped due to unwinding of the spring, should first be
winded manually by rotation of the watch crown for 15-20 turns. If the watch
is worn n the wrist, it will wind up automatically. To set the current time:
a watch crown should be pulled out from the case to the extreme right fixed
position and then rotated clockwise to set the right time. Then the watch crown
should be returned to the initial position by pushing. In order to set the time
according to time signals, the watch crown should be pulled out at the moment
when the second hand is at the figure "12" and the watch startup is launched
according to the time signal. 1. initial position / Watch winding 2. calendar
current time setting
- Date-of-the mont setting and correction
To set the date you should pull out the watch crown to the extreme right
fixed position and then move hands clockwise by rotating the watch crown until
the date changes. Then if it is necessary to change the date-of-the month for
more than one day, the watch crown should be moved to the left and to the middle
fixed position and then to set the desired date by rotating the watch crown.
When the date is set, the watch crown should be pulled out to the extreme right
position and, as described above, to set the hands to the current time. When
the date is set after 12 a.m. the hands should be moved one full clockwise and
only then you should set current time. The watch crown is returned to its initial
position by pressing. In order to correct the calendar when a month of less
than 31 days is over you should pull the watch crown out to the middle fixed
position and then set a desired date by rotating the watch crown. Thus it will
not result in current time errors. Then the watch crown is returned to its initial
position by pressing.
|
