The POLJOT watch is a first quality product with a 23 ruby movement comprising of the additive timer, calendar display, and anti-shock equipment. The watch indicates accurate time in hours, minutes, seconds as well as the day of the month. This watch is aimed at measuring time intervals within 30 minutes in minutes and seconds.

TY25.07.1539-84
Caliber 31 mm
Height 7.35 mm
Side second hand
Date-of-the month calendar
Stopwatch: summing-up function
Central chronograph hand
Side hand of minute counter 30-min capacity of minute counter scale
23 Ruby jewels
Balance period 0.33(3)s
Mean daily rate from - 10 to + 20 s/day
Minimum 42-h of work with full winding with stopwatch turned-off, at least 37-h
winding with stopwatch turned-on

a/ Winding up the watch
b/ First click - Time and date setting

- Average daily rate at a temperature ofą20°C (ą5°C) from -2 to +5 sec per day
- Winding the watch completely gives the watch 42 hours of running time
- With minimal care the watch has an average life span of ten years
- Watch-case surface 5 mcac. gold

ATTENTION, PLEASE

The Model 3133 movement includes a chronograph timer. This is activated by pushing the timer button.
For stopping the timer it is required to press the timer button once more.
For setting the timer to the zero position it is required to press the reset timer button.
The timer is intended solely for measuring short time intervals.
CAUTION: Pressing the reset timer button while the timer is running will cause a failure of the mechanism!
Use timer 30min max ! It is not made to run all the time - your watch will gain or loose time!

USER'S MANUAL

Your watch will serve you reliably assuming you diligently follow our advice:
Regularly winding up your watch once per 24 hours (recommended in the morning) until you feel resistance.
Protect your watch against falling, extreme shocks, strong magnetic field, water and the effects of harsh chemicals.
To maintain the high accuracy of your watch it is necessary to have it services regularly. Have it cleaned, lubricated and adjusted by a qualified watch repairman every two or three years.
Avoid exposing your watch to sudden changes of temperature to prevent sweating under the watch-glass.
For setting the hour and minute hands it is necessary to pull the crown out softly from the watch-case. Once the crown is in this position, you simply turn it clockwise or anti-clockwise to adjust the hour and minute. Once completed, simply push the crown back in.
For setting the date display it is required to get the crown to the "time setting" position and turn the hands in the clockwise direction until the change of the date and until the hands reach the point "01.00 hours".
In the case of the need it is possible to shift the date by several days back through turning the crown in the reverse direction until the point "10.00 hours" and then back in the clock-wise direction to the point "01.00 hours" For any cycles of shifting the hands within the time interval from 01.00-10.00-01.00 hours, the date is changed by one day.
For starting and stopping the timer it is required to press the timer button. Returning the timer to its starting (zero) position is done via pressing the reset timer button after stopping the timer with the timer button.
For the addition of timer intervals after every stopping it is required to launch it again and stop the timer with the timer button.
To set the phase of the Moon : the watch crown should be brought to the position of dale-setting and then the phase of the Moon is set. When it reaches the right size, you should set the time and return the watch crown. Note: when moving the hands past midnight, the date will change automatically. Thus, it should be adjusted together with the Moonphase setting.